Install messages: do it yourself, or ask us

Physical PBX system in company with remote management /
control function


If you are dealing with a PBX system, before ordering any messages from us, you are advised to check yourself or consult with your installer to see if your PBX allows you to use messages with texts you have in mind. To prepare the texts of the messages you need to know, for example, how long they can be and, above all, you need to know exactly how the system behaves when the caller presses a particular key. Basically you have to know how the so-called "ivr" was designed / programmed, that is, the tree of the various messages in cascade. Thus, check these aspects to prepare the texts of the messages in a way that does not make them conflict with the functions of your PBX.

"ASSISTANCE FROM INSTALLER\ SOLUTION"
• prepare the texts of the messages that you would like to order from us
• order the recordings using the online form on our website.
• give our recordings to your installer who will load them in the memory of the PBX

You are no longer in contact with the installer?
Or maybe you want to explore the possibility of changing the telephone system?
Ask for help from a system integrator in your area: fill out this short form and you will be contacted by one of our affiliates.

"INDEPENDENT" SOLUTION
• prepare the texts of the messages that you would like to order from us
• order the recordings using the online form on our website.
• Read the PBX instruction manual or, if you know how to operate it, go directly to the web page of the PBX management where you can upload the file
• take the audio file directly from the hard drive of your PC and load it into the management of your PBX

"WE TAKE CHARGE" SOLUTION
• prepare the texts of the messages that you would like to order from us
• order the recordings using the online form on our website.
• check that you have the web address and password to access the PBX remotely
• in the quote request form on our website, in addition to the message recording, also request the service of "load message directly into memory ". Then we will do everything, ensuring maximum sound quality